WiseFlex+ Aluminum Lidding Foil
The Lidding Foil that goes with Blister Foil
Our WiseFlex+ aluminum lidding foil is a high-end metal foil. In fact, our desiccative cold form films are sealed by this type of lidding foil. Thus, we add a variety of new options to our blister packs. Whether you prefer a peel, peel-push, push-through or simple tear to open our lidding foil makes these possible for any of your product’s packaging needs. This, combined with the excellent barrier properties keeps pharmaceutical products safe and fresh.
Product Information
Brochure
Download BrochureMaterial Safety Data Sheet (MSDS)
These files are password protected, request password
Technical Data Sheet (TDS)
These files are password protected, request password
WiseSorbent® Pharmaceutical Industry Video
1. Does PTP aluminum foil perform a desiccative function?
PTP aluminum foil is laminated b PE and aluminum. It has high barrier performance but does not have a desiccative function.
2. Can PTP aluminum foil be used with traditional blister film?
WiseFlex+ PTP aluminum foil is specially designed for WiseFlex+ cold form aluminum desiccant blister film. It cannot be used with other types of blister film.
The WiseFlex+ CR/SF Foil is another high-end metal foil that can be sealed to our desiccative cold form film. This design is integral for any family in need of protecting their children from pharmaceutical products they shouldn’t come into contact with. Meanwhile, it allows senior citizens a way to open their medication without struggling. This combined approach solves both problems of children getting into medication and seniors being more independent with their lives at the same time. Further still, this combined with our desiccative cold film allows for protection, increased shelf life and overall freshness to increase across the board.
- Product Code:
CA22001 - Raw Material:
Aluminum, PE - Packaging Material:
Aluminum foil + Bubble Foil + Wrapping Film + Paper Carton
- Standard Packaging:
Length: 500m/roll/carton
Diameter: 400mm
Paper carton: 450*450*1000 - Product label should include following content:
Manufacturer name
Product description
Product quantity per carton
Product code
Batch number
—Country of origin
| wdt_ID | Items | Standard |
|---|---|---|
| 1 | Appearance | No holes, odor, foreign matter, adhesion, bubbles, wrinkles, stains, etc. No separation or obvious damage between laminated layers |
| 2 | Thickness (μm) | 40 |
| 3 | Grammage (g/m²) | 75.0 |
| 5 | Stretch Strength (N/ mm) - Horizontial | ≥3.5 |
| 6 | Stretch Strength (N/ mm) - Vertical | ≥3.5 |
| 7 | Peel Strength (N/15mm) | ≥6.0 |
| 8 | Heat Seal Strength (N/15mm) | ≥12 |
| 9 | Water Vapor Transmission Amount (38℃, RH90%) | ≤0.5g/(m²·24h) |
| 10 | Oxygen Transmission Amount (23℃) | ≤0.5cm³/(m²·24h·0.1MPa) |
| 11 | Total residual solvents | ≤5mg/m² |
| 12 | Benzene Residue (mg/m²) | None detected |
| 13 | Fluorescent Identification | No flake fluorescent |
| 14 | Total bacterial count (cfu/cm²) | ≤10³ |
| 15 | Mould and yeast count (cfu/cm²) | ≤10² |
| 16 | Escherichia coli | Not detectable |
